Request For Our Latest Prices On Hastelloy Threaded Rods in Kuala lumpur, Malaysia!
Mira Fasteners is a renowned manufacturer and distributor of Hastelloy Threaded Rods in Kuala Lumpur, Malaysia. Our partially or completely threaded rods are constructed from Hastelloy C22, C276, and other high-performance grades that exhibit superior corrosion resistance and mechanical strength in harsh environments. These anchoring rods are applied for anchoring, structural fixation, and mechanical assembly in industries exposed to continuous exposure to aggressive chemicals, high pressures, and high temperatures. We provide tailored lengths and diameters for compliance with ASTM, DIN, and ASME specifications with rigid dimensional tolerances.
| Specifications | ASTM B574 / ASME SB574 |
|---|---|
| Fasteners size | Bolt / Screw Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes Nuts Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes Washers Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes Machine Screws Size : M1.6 – M12 Self Tapping Screw Size : No.2 – No. 14 |
| Fasteners Length | 3 mm to 200 mm |
| Fastener Threads | UNF, BSW, BSF, METRIC, UNC or as required |
| Standard of High Nickel Alloy Fasteners | DIN : DIN 934, DIN 931, DIN 970, DIN 933 UTS : UNEF, NPT, UNC, UNS, UNF, NPTF ISO : JIS standards, ISO 4033, ISO 4032, ANSI – American National Standards Institute ASME B18.5 ANSI B 28.2.4 1M as per defined in ASME B16.5 standard Stud Bolt length ANSI B 18.2.4 2M as per defined in ASME B18.2.2 Hex nuts |
| Dimensions | DIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3 |
| Surface Coating | Ptfe Coated High Nickel Alloy Fasteners Phosphate Coating Teflon Coating Zinc Coating Hot Dipped Galvanizing Coating Cadmium Coating Xylon Coating |
| Fasteners Finishing | High Nickel Alloy : Self-Colour, Passivated, Bright Zinc Plated (BZP), Hot Dip Galvanised (HDG), High Nickel Alloy, Sherardized, some special one like DACROMET Geometry and Mechanically Applied coating ,Dacroment, nickel plated, anodizing, plated zinc-nickel Zinc (blue, black, yellow, white), black oxide. |
| Grade | C | Mn | Si | Co | S | Ni | Cr | Fe | Mo | W | V | P |
| Hastelloy Threaded Rods | 0.010 max | 1.0 max | 0.08 max | 2.5 max | 0.03 max | Bal | 14.5 – 16.5 | 4 – 7 | 15 – 17 | 3 – 4.5 | 0.35 max | 0.04 max |
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Hastelloy Threaded Rods | 8.89 g/cm3 | 1370 °C (2500 °F) | Psi – 1,15,000 , MPa – 790 | Psi – 52,000 , MPa – 355 | 40 % |
To satisfy our clients needs by providing high quality products at competitive price as per the schedule and to maintain long term relationship with our clients.
Hastelloy Threaded Rods are widely applied in offshore oil platforms, chemical reactors, heat exchangers, marine risers, and power plants. Their non-reactive nature in acids and oxidizing agents positions them best for use in holding equipment in flue gas desulfurization systems and nuclear waste treatment. The rods are applied where long service life and non-reactivity are paramount. Mira Fasteners offers Hastelloy threaded rods for sectors that need high-performance solutions within corrosive, high-load, or high-temperature conditions.
We understand the importance of packaging and as such, at Mira Fasteners, we make sure that our Hastelloy threaded rods are packed properly. They are separately wrapped with protective material to avoid any harm, rusting and contamination during transportation. Our packaging solutions include; cartons and bespoke packaging depending on your requirement. We ensure proper labeling and packing to enable identification and handling of the products to enhance the quality of the products that we offer them in the best condition.
Mira Fasteners is a leading manufacturer and supplier of high-quality fasteners in Kuala lumpur, Malaysia, with over 8 years of experience serving global industries.
©2024 Mira Fasteners All Rights Reserved.
